A Ram Pump is a cyclic water pump powered by hydropower. It takes in water at one “hydraulic head” pressure and flow rate, and outputs water at a higher hydraulic head and lower flow rate. The device uses the water hammer effect to develop pressure that allows a portion of the input water that powers the pump to be lifted to a point higher than where the water originally started.
source/image(PrtSc): Junkyard – Origin of Creativity
How to make a hydraulic improved version of hydraulic ram pump which requires no electricity and no motor. This pump consisting of four brass check valve which increases pressure and water output.
his pump uses falling water to lift a lesser amount of water to a higher elevation than the source. So, being primarily used for lifting a relatively small amount of water to a higher elevation.
Advertisement
If you want to deliver 2 cubic meters of water to an elevated location, you need at least 6 cubic meters of water to operate the pump 4 cubic meters of which will be used to drive the pump and goes directly as waste.//Junkyard – Origin of Creativity
